Senior lecturer, School of Aerospace and Aircraft Engineering, Kingston University
Research
A.J. Curley and A.C. Smith: "Performance of induction motors with shaft mounted torque discs", International Conference on Electrical Machines, Manchester, September 1992.
A.J. Curley: " Frequency response analysis of synchronous machines to determine transient stability", International Conference on Electrical Machines, Poland, Sept 1993, pp. 91-98.
A.J. Curley: "Transient stability of synchronous machines", 4th Conference of Indonesian aerospace students in Europe, Imperial College, London, Sept. 1992, pp. 256-264.
R. Chedid and A.J. Curley: " Axi-symmetrical finite element modelling of induction machine end-region", Electrosoft 93, Southampton, July 1993, pp. 546-553.
A.J. Curley, D. Hitchings, G.A.O Davies and D. Widyanto: " A finite element trainer", NAFEMS Conference, Brighton, June 1993, pp. 674-683.
A.J. Curley and D. Hitchings: " A computer based finite element trainer", Benchmark Journal, July 1993, pp. 7-11.
A.C. Amarasinge, A.J. Curley and S.M. Vaezi-Nejad: " Fabrication, Characteristics and application of photoreceptors", Fifth Int. Conf. Chemical sensors, Rome, 1994, pp. 573-576.
A.J. Curley and S.M. Vaezi-Nejad:"Serving local industry through final year undergraduate projects", Higher Education Conference, Sheffield University, August 1994, pp. 137-140.
A.J. Curley, R. Dulai and R. Perryman,: "Rotor parameter calculation of cage induction machines", Int. Conference on Electrical Machines, Warsaw, Sept. 1994, pp 1371-1375
A.J. Curley, M.S. Herbert and R. Perryman: "Computer Based Simulation of Vector Controlled AC Drive System for Performance Analysis and Condition Monitoring", Universities Power Engineering Conference, London, Sept. 1995, pp. 1114-1117.
A.J. Curley and R. Perryman: "Torque Ripple Analysis of Inverter fed Motor Drives", Universities Power Engineering Conference, London, Sept. 1995, pp. 956-959.
B. Blackman, A.J. Curley A.J. Kinloch and A. Taylor: "Imapact durability and life predictions of adhesive joints", Institute of materials, London, March 1996, pp. 14-16.
A.J. Curley, I. Dyson, M. Fernando and A.J. Kinloch: "The cyclic fatigue behaviour of structural adhesive joints", International Materials Conference Cambridge, Sept. 1996.
A. Cornwell, A.J. Curley and K. Williams: "Failure load prediction of adhesion in solderable thick film conductors", International Section Hybrid Microelectronics (Nordic), Oslo, Sept 1997, pp. 174-177.
A.J. Curley, J.K. Jethwa and A.J. Kinloch: The fatigue and durability behaviour of automotive adhesives part III: Predicting the service life, Journal of Adhesion, May 1998, pp. 39-59.
A.J. Curley, A.J. Kinloch and A.C. Taylor: "The development of finite element and fracture mechanics models to predict the lifetime of structural adhesive joints", International Conference on Structural Adhesives in Engineering, Bristol, April 1998.
A. Curley, P. Giaconne, G. Jones and S. Minelly: "Reducing chromatic grain noise in film sequences", I.E.E. Image Processing Colloquium, London, May 1998.
A. Curley, P. Giaconne, G. Jones and S. Minelly: "Multi-channel adaptive signal processing of cinematography imaginary", N.M.B.I.A., Glasgow, July 1998.
A. Curley and J. Kapadoukas: "Investigation of data services into SDH networks and managing bandwidth on demand", The SDH Forum, London, September 1998.
A. Curley, S.W. Kim, A.J. Kinloch, P.J. Savage, A.C. Taylor:" Modelling and Predicting the lifetime of Adhesively bonded joints and Components", EURADH 98, 4th European Conference on Adhesion, Germany, 257-259, September 1998.
A. Curley, T. Le, H. Patel and K. Williams: "Adhesion of plastic ball grid array packages on thick film circuits", 12th European Microelectronics and Packaging Conference Harrogate, June 1999.
A. Curley, T. Le, H. Patel and K. Williams: "The cyclic Fatigue behaviour of ball grid arrays", 12th European Microelectronics and Packaging Conference Harrogate, June 1999.
A. Curley, P. Giaconne, G. Jones and S. Minelly: "Motion compensated multi-channel noise reduction of colour film sequences", International Journal of Electronic Imaging, Nov 1999
A. Curley, T. Le, H. Patel and K. Williams: "The cyclic Fatigue Behaviour of Ball Grid Arrays", Microelectronics International Journal, October 1999.
A. Curley, A. Mouharam and M. Tunnicliffe: "Monitoring Quality of Service of an ATM Network", Control of Next Generation Networks Colloquium, IEE London, October 1999.
A. Curley, A. Mouharam and M. Tunnicliffe: "Monitoring VBR Video Traffic and Multistate Markov Chain Model on ATM
A.J. Curley, H. Hadavinia, A.J. Kinloch and A.C. Taylor: "Predicting the Service-Life of Adhesively-Bonded Joints", 10th Int. Conf. on Fracture, 2-6 Dec 2000. Honolulu, Oahu, Hawaii.
A.J. Curley, H. Hadavinia, A.J. Kinloch and A.C. Taylor: "Predicting the Service-Life of Structural Adhesive Joints", Int. Journal of Fracture, Vol. 103, pp 41-69, 2000.
A. Curley and B. Li: "Removal of 'Salt and Pepper' noise from Geographical Images", International Symposium on Mobile Mapping Technology, Egypt, Jan. 2001.
P. Barrett, A. Curley, J. Ferguson, M. Tunnicliffe, P. Scott and K. Williams: "Thick Film Technology for Wireless Applications", Mobile Tech. Conf. Bratislava, July 2001.
P. Clements, A.J. Curley, A. Ellery and O. Reutter: "An Electronic Diagnostic Facility To Assess The Functionality of a Deployable Aircraft Data Recording System", Technology and Training in Industry Conference (TTI), July 2002.
A.J. Curley, H. Hadavinia, A.J. Kinloch and A.C. Taylor: "Predicting the Service-Life of Structural Adhesive Joints", Int. Journal of Fracture, Vol. 103, pp 41-69, 2000
A. Curley and B. Li: "Removal of 'Salt and Pepper' noise from Geographical Images", International Symposium on Mobile Mapping Technology, Egypt, Jan. 2001.
A. Curley, A. Ellery and C. Welch: "Design Options for a New Astrobiology Focussed Mars Mission - Vanguard", 2nd World Space Congress, Houston, Texas. (IAC-02-Q.3.2.04), October 2002.
A. Curley: "Adapive Filtering Of 'Salt and Pepper' Noise from Martian Rover Images Using Weiner Filtering", 5th International Conference on Space Optics, 30 March - 2 April 2004, Toulouse, France. Paper Accepted.
A. Curley, A. Ellery, N. Patel and C. Welch: "Preliminary Analysis of Mobility and Suspension Systems for a Mars Micro Rover", 2nd World Space Congress, Houston, Texas. (IAC-02-U.2.08), October 2002.
A. Curley, A. Ellery, N. Patel, C. Welch and: "ELMS: The concept and Future Prospects for Rover Mobility on Mars", 7th ESA/ASTRA Conference, Noordjwik, Netherlands. 19-21st November 2002.
A. Curley and J. Niklewicz: "The Fatigue Behaviour of bonded Aerospace Carbon-Fibre/Epoxy Composite Joints", Composites Testing and Model Identification Conference, 28 -30th January 2003. ENSAM Chalons-en-Champagne, France.
A. Curley, A. Ellery, N. Leveque and C. Welch, ,: "Trajectory Simulations for Thrust-Vectored Electric Propulsion Missions", International Electric Propulsion Conference, 17-21 March 2003. Toulouse, France. (IEPC-030-0050).
A. Curley, A. Ellery, N. Patel and C. Welch: "Elastic Loop Mobility System (ELMS): Concept, Innovation and Performance Evaluation for a Mars Robotic Rover", IAC-03-IAA.1.1.05, 54th International Astronautics Conference, Bremen, Germany, 29th Sept to 3rd Oct 2003.
Areas of expertise