Professor Jian Wang
Faculties, departments and locations
- Faculty of Engineering, Computing and the Environment
- Department of Aerospace and Aircraft Engineering
- School of Engineering
- Roehampton Vale
Professor of Aircraft Technology
- Email:
- [email protected]
About
I am Professor of Aircraft Technology in the Department of Aerospace and Aircraft Engineering. After working in industry in China for nearly 10 years, I came to the UK and completed my PhD in 1998 at Cardiff University. I worked as a research associate at Cardiff University and then Cambridge University. I was a lecturer at Queen's University Belfast before joining Kingston University in September 2009.
My main research areas include renewable energy, vibro-acoustic and noise control, flow transition and drag reduction, and aircraft anti-icing. I have published more than 100 peer-reviewed papers and secured research funding from EPSRC, TSB, EU, and industry.
I was awarded the Kenneth Harris James Prize by the Aerospace Division of IMechE; the George Stephenson Prize by the IMechE in 2010.
I am an Associate Fellow of American Institute of Aeronautics and Astronautics (AIAA); Member of the Editorial Board for three international journals; Fellow of the Higher Education Academy.
Qualifications
- PGCHET, Queen's University Belfast, 2005
- Anglia Polytechnic University – Post Graduate Certificate in Computer Science, 2003
- Doctor of Philosophy, Cardiff University
- University of Science and Technology of China, M. Phil, Computational Mechanics, 1987
- Department of Applied Mechanics, National University of Defence Technology, (China) BEng. Solid Mechanics, 1982
Domains
Publications
Effects of surface roughness on splashing characteristics of large droplets with digital inline holographic imaging
Wang, Qiao, Lin, Xiaodan, Lin, Yujing, Ma, Junlin, Xiao, Jingping, Wu, Yingchun and Wang, Jian, 2021, Cold Regions Science and Technology (191), Published
Drag reduction using biomimetic sharkskin denticles
Bhatia, Dinesh, Zhao, Yingxue, Yadav, Devinder and Wang, Jian, 2021, Engineering, Technology and Applied Science Research (11), 5pp 7665-7672, Published
Laminar flow control and drag reduction using biomimetically inspired forward facing steps
Bhatia, Dinesh, Li, Guangning, Sun, Jing and Wang, Jian, 2021, Journal of Applied and Computational Mechanics (7), 2pp 752-763, Published
Transition delay and drag reduction using biomimetically inspired surface waves
Bhatia, D., Li, G., Lin, Y., Sun, P., Li, H. and Wang, J., 2020, Journal of Applied Fluid Mechanics (13), 4pp 1207-1222, Published
Compressive properties of min-mod-type limiters in modelling shockwave-containing flows
Li, Guangning, Bhatia, Dinesh and Wang, Jian, 2020, Journal of the Brazilian Society of Mechanical Sciences and Engineering (42), Published
A review of UAE native seaweed as potential bio-refinery feedstock for jet fuel and high value chemicals
Farzaneh, R, Dansoh, C, Augousti, A and Wang, J, 2020, Advance in Environmental Waste Management & Recycling (3), 1pp 10-15, Published
Biomimetics: a potential solution to drag reduction in modern aerodynamics
Bhatia, D and Wang, J, 2019, Global Journal of Engineering Sciences (3), 4, Published
Combined use of parallel-plate compression and finite element modeling to analyze the mechanical properties of intact porcine lens
Wang, Kehao, Venetsanos, Demetrios, Wang, Jian and Pierscionek, Barbara K., 2018, Journal of Mechanics in Medicine and Biology (18), 7, Published
Effect of nozzle rotation angles and sizes on thermal characteristic of swirl anti-icing
Ismail, Mohd Azmi and Wang, Jian, 2018, Journal of Mechanical Science and Technology (32), 9pp 4485-4493, Published
Mechanical properties of LY-12 connecting structure: influence of corrosion and quenching
Li, Zheng, Bai, Fengyu, Zhang, Wei and Wang, Jian, 2017, Science of Advanced Materials (9), 6pp 999-1014, Published
Gradient moduli lens models: how material properties and application of forces can affect deformation and distributions of stress
Pierscionek, Barbara, Wang, Kehao, Venetsanos, Demetrios and Wang, Jian, 2016, Scientific Reports (6), Published
Effect of leading edge geometry on boundary layer transition: an experimental approach
Bhatia, Dinesh, Yang, Guang Jun, Sun, Jing and Wang, Jian, 2014, Applied Mechanics and Materials (590)pp 53-57, Published
Heat transfer through a single hole bias flow acoustic liner
Ives, Anthony O., Wang, Jian, Raghunathan, Srinivasan and Sloan, Patrick, 2011, Journal of Thermophysics and Heat Transfer (25), 3pp 409-423, Published
Model updating of an enclosure using imaginary elements
David-West, O. S., Wang, J. and Cooper, R., 2011, Applied Mechanics and Materials (70)pp 309-314, Published
Finite element model updating of a thin wall enclosure under impact excitation
David-West, O. S., Wang, J. and Cooper, R., 2010, Applied Mechanics and Materials (24-25)pp 337-342, Published
Reliability sensitivity by method of moments
Lu, Zhenzhou, Song, Jun, Song, Shufang, Yue, Zhufeng and Wang, Jian, 2010, Applied Mathematical Modelling (34), 10pp 2860-2871, Published
Short, medium and long term load forecasting model and virtual load forecaster based on radial basis function neural networks
Xia, Changho, Wang, Jian and McMenemy, Karen, 2010, International Journal of Electrical Power and Energy Systems (32), 7pp 743-750, Published
Molecular dynamics simulation of single graphene sheet under tension
HAN, Tong-wei, He, Peng-fei, Wang, Jian and Wu, Ai-hui, 2010, Xinxing Tan Cailiao/New Carbon Materials (25), 4pp 261-266, Published
Aerodynamic performance of bypass engine with nozzle exit area change by warped chevrons
Sloan, B, Wang, J, Spence, S, Raghunathan, S and Riordan, D, 2010, Journal Of Aerospace Engineering - Part G (224), 6pp 731-743, Published
The process model to aid innovation of products conceptual design
Li, Wenqiang, Li, Yan, Wang, Jian and Liu, Xiaoying, 2010, Expert Systems with Applications (37), 5pp 3574-3587, Published
Ply stacking sequence optimization of composite laminate by permutation discrete particle swarm optimization
Chang, N., Wang, W., Yang, W. and Wang, J., 2010, Structural and Multidisciplinary Optimization (41), 2pp 179-187, Published
The effect of vacancy defects on the tensile mechanical properties of single graphene sheets
Tongwei, HAN, Pengfei, HE, Wang, J and Aihui, WU, 2010, Tongji Daxue Xuebao/Journal of Tongji University (38), 8pp 1210-1214, Published
Functional solving process model toward product innovation design based on a functional solving model with multiple elements and evolutions
Li, W, Li, Y, Wang, J and Xiong, Y, 2009, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (223), 12pp 1601-1614, Published
Numerical simulation of temperature dependence of tensile mechanical properties for single graphene sheet
Han, T. W., He, P. F., Wang, J. and Wu, A.H., 2009, Tongji Daxue Xuebao/Journal of Tongji University (37), 12, Published
Strain rate dependences of tensile failure process for single graphene sheet: a molecular dynamics study
Han, T. W., He, P. F., Wang, J., Zheng, B. L. and Wu, A. H., 2009, Science in China Series G: Physics, Mechanics & Astronomy (39), 9pp 1312-1319, Published
Molecular dynamics simulation of beta-SiC nanowire under uniaxial tension
Han, T.W., He, P.F., Wang, J. and Zheng, B.L., 2009, Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research (23), 4pp 337-342, Published
Energy absorption and deformation in textile composite cellular structures
Tan, Xincai, Chen, Xiaogang, Wang, Jian and Raghunathan, Srinivasan, 2009, AIAA Journal: devoted to aerospace research and development (47), 3pp 790-795, Published
Reliability sensitivity method by line sampling
Lu, Zhenzhou, Song, Shufang, Yue, Zhufeng and Wang, Jian, 2008, Structural Safety (30), 6pp 517-532, Published
Dynamic friction model and its application in flat rolling
Tan, Xincai, Yan, Xiu-Tan, Juster, Neal P., Raghunathan, Srinivasan and Wang, Jian, 2008, Journal of Materials Processing Technology (207), 1-3pp 222-234, Published
A software oriented CNC system based on Linux/RTLinux
Ji, Hua, Li, Yi and Wang, Jian, 2008, International Journal of Advanced Manufacturing Technology (39), 3-4pp 291-301, Published
Evaluation of standards for transmission loss tests
Cassidy, Matthew, Cooper, Richard, Gault, Richard and Wang, Jian, 2008, Journal of the Acoustical Society of America (123), 5pp 3190-3190, Published
Simultaneous optimization of fuel consumption and emissions for a parallel hybrid electric SUV using fuzzy logic control
Chen, Jian, Li, Yan and Wang, Jian, 2008, International Journal of Vehicle Design (46), 2pp 204-218, Published
Indentation fatigue behaviour of polycrystalline copper
Xu, B.X., Yue, Z.F. and Wang, J., 2007, Mechanics of Materials (39), 12pp 10667-1080, Published
Experimental and numerical study of the superelastic behaviour on NiTi thin-walled tube under biaxial loading
Wang, J., Wang, Y.F. and Yue, Z.F., 2007, Computational Materials Science (40), 2pp 246-254, Published
Design creativity in product innovation
Li, Yan, Wang, Jian, Li, Xianglong and Zhao, Wu, 2007, International Journal of Advanced Manufacturing Technology (33), 3-4pp 213-222, Published
Numerical study of effect of surface roughness on superelastic behaviour of shape memory alloys
Wang, Y.F., Yue, Z.F. and Wang, J., 2007, Materials Science and Engineering: A (458), 1-2pp 312-318, Published
An investigation into the relationship between sound intensity and normal surface velocity
Boyle, Mark, Cassidy, Matthew, Cooper, Richard, Gault, Richard and Wang, Jian, 2007, Journal of the Acoustical Society of America (121), 5pp 3155-3155, Published
Axial load capacity of cold-formed steel wall stud with sheathing
Tian, Y. S., Wang, J and Lu, T. J., 2007, Thin-Walled Structures (45), 5pp 537-551, Published
The effect of grain orientation on the tensile-compressive asymmetry of polycrystalline NiTi shape memory alloy
Wang, Y.F., Yue, Z.F. and Wang, J., 2007, Materialwissenschaft und Werkstofftechnik (38), 4pp 294-298, Published
On the study of the effects of notch shape on creep damage development under constant loading
Jiang, Y.P., Guo, W. L., Yue, Z. F. and Wang, J., 2006, Materials Science and Engineering: A (437), 2pp 340-347, Published
Sound transmission through lightweight double-leaf partitions: theoretical modelling
Wang, J., Lu, T.J., Woodhouse, J., Langley, R.S. and Evans, J., 2005, Journal of Sound and Vibration (286), 4-5pp 817-847, Published
A universal optimal approach to cam curve design using uniform B-splines
Qiu, Hua, Lin, Chang-Jun, Li, Zi-Ye, Ozaki, Hiroaki, Wang, Jian and Yue, Yong, 2005, Mechanism and Machine Theory (40), 6pp 669-692, Published
The role of frame members and sheathing in partition wall panels subject to compression
Wang, J., Tian, Y. S. and Lu, T. J., 2005, Thin-Walled Structures (43), 6pp 983-1002, Published
Optimization design for thrust reverser cascade with a view to reduce noise
Yao, H., Butterfield, J., Raghunathan, S., Wang, J., Cooper, R. and Benard, E., 2005, Multidiscipline Modeling in Materials and Structures (1), 1pp 63-72, Published
Racking strength and stiffness of cold-formed steel wall frames
Tian, Y. S., Wang, J. and Lu, T. J., 2004, Journal of Constructional Steel Research (60), 7pp 1069-1093, Published
An experimental study on the axial behaviour of cold-formed steel wall studs and panels
Tian, Y. S., Wang, J., Lu, T. J. and Barlow, C. Y., 2004, Thin-Walled Structures (42), 4pp 557-573, Published
A study on an evaluation method for form deviations of 2D contours from coordinate measurement
Qiu, H., Li, Y.-B., Cheng, K., Li, Y. and Wang, J., 2000, International Journal of Advanced Manufacturing Technology (16), 6pp 413-423, Published
An approach to form deviation evaluation for CMM measurement of 2D curve contours
Qiu, H, Li, Y, Cheng, K, Li, Y. B. and Wang, J, 2000, Journal of Materials Processing Technology (107), 1-3pp 119-126, Published
Design and performance predictability of valve stem seals using FEA
Fern, A., Mason-Jones, A., Pham, D. T. and Wang, J. (1999). Warrendale, PA., U.S.: (SAE International) [Published]
Effect of step surface imperfections on boundary layer transition
Lin, Yujing and Wang, Jian (2021). [Published]
Model updating of an enclosure using imaginary elements
David-West, O. S., Wang, J. and Cooper, R. (2011). [Published]
Comparison criteria for ice accretion on an aerofoil surface
Mussa, Ifrah, Wang, Qiao, Lin, Yujing and Wang, Jian(2021). [Published]
Computational investigation on airframe noise generation around high-lift devices
Lin, Yujing, Wang, Jian and Sharif Moghadam, Sharon(2020). [Published]
Preliminary analysis of ice accretion prediction on wind turbine blades
Mussa, Ifrah, Lin, Yujing, Wang, Jian and Abbadi, Muram(2020). [Published]
Model updating of an enclosure using imaginary elements
David-West, O. S., Wang, J and Cooper, R.(2011). [Submitted]
Model updating of an enclosure using imaginary elements
David-West, O. S., Wang, J. and Cooper, R.(2011). [Published]
Finite element model updating of a thin wall enclosure under impact excitation
David-West, O. S., Wang, J and Cooper, R.(2010). [Published]
Numerical modelling of acoustic sources
Bell, M, Cooper, R., Houston, G. and Wang, J(2010). [Published]
Design optimization of composite wing box for flutter and stiffness
Chang, N., Yang, W., Wang, J. and Wang, W.(2010). [Published]
Experiment study and design of moveable partition wall
Chen, J., Wang, J. and Cassidy, M.(2009). [Published]
A comparative study of near-field acoustic holography and intensity techniques applied to a loudspeaker source
Gault, R., Cooper, R., Boyle, M., Wang, J. and Tournour, M.(2009). [Published]
Near-field acoustic holography applied to a loudspeaker pseudo engine source
Gault, R., Cooper, R., David-West, O. S., Wang, J. and Tournour, M.(2009). [Published]
Numerical and experimental based comparison of the dynamic properties of enclosures with and without hole
David-West, O. S., Wang, J., Gault, R. and Cooper, R.(2009). [Published]
Innovative form design based on functional attribute
Li, T., Li, Y. and Wang, J.(2009). [Published]
Risk analysis in lifecycle costing of aluminium
Tan, Xincai, Wang, Jian, Xu, Yuchun, Curran, Ricky, Raghunathan, Srinivasan, Gore, David and Doherty, John(2008). [Published]
Life Cycle Assessment of Aluminium for Engineering Application
Tan, Xincai, Xu, Yunchun, Wang, Jian, Curran, Ricky, Raghunathan, Raghu, Gore, David and Doherty, John(2008). [Published]
Manufacturing cost modeling for technology assessment
Xu, Y ., Tan, X., Wang, J., Curran, R., Raghunathan, S., Doherty, J. and Gore, D.(2008). [Published]
Numerical investigation on the effectiveness of water spray deluge in providing cooling, smoke dilution and radiation attenuation in fires
Wen, Jennifer, Dembele, Siaka, Yang, Manjiang, Tam, Vincent and Wang, Jian(2008). [Published]
A generic life cycle cost modeling approach for aircraft system
Xu, Yuchen, Wang, Jian, Tan, Xincai, Curran, Ricky, Raghunathan, Srinivasan, Doherty, John and Gore, Dave(2008). [Published]
Cost-efficient materials in aerospace: composite vs aluminium
Xu, Y., Wang, J., Tan, X. and Curran, R.(2008). [Published]
Design for sound transmission loss through an enclosure of a generator set
Cassidy, Matthew, Gault, Richard, Cooper, Richard and Wang, Jian(2008). [Published]
Design tool methodology for simulation of enclosure cooling performance
Gault, Richard, Cooper, Richard, Wang, J and Collin, Graham(2008). [Published]
Modelling correlated and uncorrelated sound sources
Boyle, Mark, Gault, Richard, Cooper, Richard and Wang, Jian(2008). [Published]
Sound transmission loss of movable double-leaf partition wall
Chen, Jian, Wang, Jian and Muckian, Gerard(2008). [Published]
Using virtual engineering techniques to aid with design trade-off studies for an enclosed generator set
Gault, R., Cooper, R., Wang, J. and Collin, G.(2008). [Published]
Parametric analysis of variable nacelle nozzle throat area using warped chevrons
Sloan, Brendan, Wang, Jian, Spence, Stephen and Raghunathan, Srinivasan(2008). [Published]
Sound transmision through lightweight double-leaf partitions: 3D modelling
Wang, J., Gault, R.I., McCaughan, C., Ives, A., Tian, Y. S., Lu, T. J., He, P. and Xia, C.H.(2008). [Published]
Sound Transmission Through Lightweight Double-Leaf Partitions: Systematic Parametric Analysis,
Wang, J., Lu, T. J., Gault, R.I., Tian, Y. S., Li, Y., Xia, C.H. and Tan, X.C.(2008). [Published]
Modelling energy absorption in textile composite cellular structures
Tan, X., Chen, X., Wang, J. and Raghunathan, S.(2008). [Published]
Life cycle cost modelling for aircraft wing using object-oriented systems engineering approach
Xu, Y, Wang, J, Tan, X, Early, J., Curran, R, Raghunathan, S, Doherty, J and Gore, D(2008). [Published]
A framework for systematically estimating life cycle cost for integrated wing
Tan, X., Xu, Y., Early, J., Wang, J., Curran, R. and Raghunathan, S.(2007). [Published]
Influence of fuel pump failure on the fuel feeding stability of an aircraft fuel system
Liu, Y., Feng, Z., Yu, K., Yue, Z. and Wang, J.(2007). [Published]
Performance and acoustic optimisation of nacelle nozzle throat area
Sloan, B., Wang, J., Raghunathan, S., Benard, E., Cooper, R. and Spence, S.(2007). [Published]
Three dimensional numerical solution of heat transfer in a honeycomb cell
Wang, J, Raghunathan, S, Benard, E., Sloan, P. and Ives, A. O.(2007). [Published]
Development of a cost management system for evolving product definition
Curran, R., Gilmour, M., McAlleenan, C., Price, M., Kelly, P. and Wang, J.(2007). [Published]
Dynamic feedback models for whole life cost prediction
Early, J., Wang, J., Curran, R., Price, M. and Raghunathan, S.(2007). [Published]
Parametric modelling and multidisciplinary design optimization of 3-D internally cooled turbine blades
Yu, K., Yue, Z. and Wang, J.(2007). [Published]
Analysis driven design and optimization methods for aircraft structures using finite element analysis
Moore, R., Murphy, A., Price, M and Wang, J(2007). [Published]
Identification of aircraft noise at landing
Wang, Jian, Yao, Hui, Benard, Emmanuel, Cooper, Richard, Raghunathan, Srinivasan, Tweedie, James and Riordan, David(2005). [Published]